Wine Making Equipment

Strong rare earth magnets and a curved blade impeller provide 7 GPM and up to 21 ft of lift

Tri-Clamp head disassembles easily for cleaning

1/2 NPT inlet and outlet

Motor is enclosed in a splash proof and super quiet case

Rotatable stainless steel head

No Refrigerator Needed!

Immersion Cooling-Only Unit

Your choice of jacket, either Carboy / Bucket or Conical

Drilled Stopper

Bulkhead connector and one-way co2 release valve

Perfect for building your own walk-in cold room

An affordable cold storage temperature controller

Make a keg room, wine cellar, lagering or fermentation chamber

Easy DIY installation in minutes

Allows a standard window-air conditioner to cool a room to 35F

A dual-stage programmable thermostat to control your fermentation chamber.

Create and share the perfect automated temperature profile for fermenting your beer.

Automate slow temperature shifts between ferment, diacetyl rest, cold crash or lager temps without shocking the yeast.

Micro SD Card allows for external program creation and data logging (card not included).

Includes Temperature Probe, 1 input power cord, 2 output power cords.

Degas and stir your wine like a pro! The three-pronged wine degasser makes use of three elongated prongs that spread out and kick CO2 out of solution like no other degassing tool on the market! The 3 pronged degassing tool is attached to a drill and is used by lowering into the carboy and cranking for a minute or so, then reversing direction and going for another minute or so. After a few cycles, your wine will be completely and thoroughly degassed! No more residual carbon dioxide in solution that can give rise to exploding bottles or a carbonic acid "bite" in your wines. Get your wines degassed like they need to be with this 3 pronged degasser!

Can also be used with beer making! The three progned degasser is a GREAT tool for creating a whirlpool in your brew kettle after the boil, AND for aerating your wort prior to yeast pitching.

24" Stainless Spoon

18" Round Head Spoon

Cheesecloth, 36" x 36"

28" Round Head Spoon

Specially designed for mixing and stirring wine/beer and de-gassing.

Manufactured of high quality food grade stainless steel  with ABS blades.

The blades act like a turbine for maximum mixing and stirring efficiency.

The  Stainless Steel Mix-Stir fits any electric drill (variable speed drill with reversing capacity recommended).

 The Plastic blades fold down allowing easy insertion into a barrel or a glass carboy. Also, it makes it safe to use with a glass carboy.

Specially designed for mixing and stirring wine/beer and de-gassing.

Manufactured in high quality polycarbonate with ABS blades and stainless steel insert.

The blades act like a turbine for maximum mixing and stirring efficiency.

The Mix-Stir fits any electric drill (variable speed drill with reversing capacity recommended).

The Mix-Stir comes standard in a 24" length. It is long enough to be used in large primary fermenters and barrels.

The Plastic blades also make it safe to use with glass carboy.

We do not recommend to use a high speed drill, since it will create stress into the joint of the plastic and the stainless steel insert.

Nylon Straining Bag, Small Fine, 10" X 23"

24" Round Head Spoon

24" Plastic Paddle

Straining Bag, Jumbo Coarse, 18" X 32"

Nylon Straining Bag, Small Coarse, 10" X 23"

Water transfer pump for hot liquor tank or recirculating chillers

High temperature up to 212'F

FDA approved food grade

Mini and energy saving

Brushless and quiet