Keg Dispensing Supplies

The name Perlick has been in the beverage industry for a long time, and has always been associated with high quality draft equipment. The 650SS is no exception. Forward-sealing so there is less chance of bacterial and yeast activity, a high-quality forward sealing faucet such as this will need to be cleaned less frequently than an inferior back-sealing standard faucet. Being all-stainless, this Perlick faucet is built to last! IN addition to these qualities, this Perlick faucet has a flow control valve for controlling the flow of your beer! Pour the perfect pint every time by adjusting based on carbonation levels, or lower the flow rate to get a perfect growler fill! Staying strong long after other metals begin to degrade, a stainless steel Perlick faucet is a long-term investment.

Most often used for CO2 connections, these quick disconnects are chrome-plated brass. This is the male side, which has a 3/8" straight barb on one end, while the other end is male andfits into the female end. It has a temperature tolerance range from -40 to 180F and a vacuum pressure tolerance of 120 PSI. This male piece is used with the female piece #04P01-111

This CO2 shutoff with 1/4" MPT threading and check valve is ideal for use with CO2 regulators and manifolds! It has 1/4" MPT right-hand threading on one side that threads into most standard regulators and manifolds. On the other end is standard 1/4" MFL threading, which works perfectly with standard swivel nut sets and other 1/4" MFL fittings. If using a swivel nut set, we recommend using a plastic flare fitting as well, in order to create a good seal. Get one of these to replace a damaged or missing shutoff, put on a wye splittler, or create your own CO2 apparatus!

This isn't just your ordinary probe washer! This is the one designed specifically for the American Perlick Sanke coupler. It is the washer for the probe on these couplers made by Perlick, a name long recognized for quality in the draft beer world. If yours goes missing or is damaged, get another one here and keep the beer flowing!

The faucet knob is the handle part of your faucet assembly. These black faucet knobs are 2.75 inches long and screw into the lever post just above the bonnet, giving you a way to get a handle on your beer! Make sure you have one of these for each of your faucets so you can pour pints for your friends and family.

If you have a Perlick lever sanke coupler with bad shaft o-rings, we've got you covered! These fit in the shaft of the Perlick lever coupler, stabilizing the shaft and allowing complete functionality. Have a few extras on hand just in case!

3/16" is the standard inner diameter for most serving systems. This 3/16" tubing is thin walled and very economical. We use it in making our dispensing line assemblies. It is durable and works well in most dispensing applications.

Inner Diameter: 3/16 in.
Outer Diameter: 5/16 in.

Have some extra tubing on hand for all your kegging needs! 5/16" inner diameter tubing is the standard tubing used in kegging and carbonation systems in the U.S. The Bevlex tubing we carry is thick-walled for extra protection and security when carbonating. This can be used on all standard CO2 connections in your draft system.

Inner Diameter: 5/16 in.
Outer Diameter: 9/16 in.