Introducing the newest player in the home brewer mill market. This is a fresh design meant to compete and win against the best milling products available. It consists of a 6061 aluminum block frame with two 6" long, 1.5" wide steel rollers riding on SAE 841 oil impregnated bronze bushings. Monster Mills use a superior grade of steel that is much harder than what is found on most comparable products and in most cases will last almost twice as long. The drive shaft, and all the axles are integral to the roller rather than screwed into the ends. This means that the mill works great driven clockwise or counter-clockwise. All the axles are 3/8", with minimal freeplay in the bushings.,One of the knurled steel rollers is driven by a standard 3/8" electric drill or hand crank (not included) to feed the grain through the adjustable gap and crush the grist. Both ends of the non-driven roller ride in bushings that are offset and mounted in an adjustable knob. The knob is held in a fixed position by a set-screw that you can loosen to adjust the mill. This system provides an adjustment range of .070". Our knobs are made from 303 stainless steel for excellent durability, and are larger in diameter than the competition, as well as knurled for a positive grip. We've also added a groove in our newest design knobs with a matching rounded head on the thumbscrew that allows for a much better grip on the knob to avoid gap changes while milling, and also providing knob retention.,These Packages come complete with a Base, 2 Roller Monster Mill Body, and a Hopper.  Choose whether to include the Hopper Extension, which upgrades Hopper capacity to a huge 39 lb!  Check out our 3 Roller Mill Packages if looking for even more crushing power.,Features:,,,Fully adjustable mill,,,Dual eccentric adjusters: 0 to .070" gap - built from STAINLESS STEEL for no galling,,,6 lbs / minute throughput,,,6" long knurled steel rollers,,,Drill-Drive - Clockwise or Counter-Clockwise,,,Alloy frame,,,SAE 841 oil impregnated bronze bushings,,,1.5" diameter steel rollers,,,3/8" integral drive shaft has three flat for drill driving, sticks 2" outside mill body